To be mounted hanging on a wall or a pillar. Mark a vertical line on the wall and fix the wall brackets. Check the height of the top cover plate and trim it to the right size. Fix the unit to the wall brackets and connect the duct.

 

The unit contains an adjusting damper which is positioned inside the sliding top cover. By undoing the screw that holds the top cover in position it can be lowered and the adjusting damper can be reached. When the adjustment has been completed the damper should be fixed in the right position. The near zone can be adjusted by a near zone regulator. These accessories can be fitted at any time.

The unit can be cleaned when the cleaning port at the bottom of the unit is opened. If the connecting duct should be cleaned through the unit it is necessary to remove the adjusting damper first. After the cleaning have been carried out the damper should be refitted and positioned in exactly the same positions as before.

Clean with water and a mild detergent solution.