Mounted on a wall. The LKB-L unit is supplied in three main
Parts: The duct connection piece, the back plate and the
front panel.
The duct connection piece is a bow shaped duct with
smooth back side and a circular duct spigot. Installation to
be carried out from below through the floor. The duct
connection is covered by a base frame. The duct connection
is fitted to the back plate and then fixed to the wall.
A table top can be fitted with screws from underneath
through the top panel of the unit. Finally the front panel is
fitted.

The duct connection piece also contains an adjusting
damper. After the correct adjustments have been carried out
the damper is fixed in its right position.
The pressure is measured with a manometer or U-tube
connected to the measuring probes.
Cleaning can be carried out either through the front panel or
through the cleaning port at the damper unit.

LKB-L	16	20	25	31
K	14,3	21,7	34,5	53,3