To be mounted in a corner hanging on a wall.
Remove the front panel.
Fit the unit vertically to the wall and fix it with screws,
through the backplate.
Refit the front panel.

The unit is supplied with a measuring unit and an adjusting
damper. The damper cord and measuring tubes are
concealed in the side rail.
When the adjustment has been completed the cord should
be pressed into the unit through the hole. The cord can be
pulled out at a later stage by removing the front plate.
The near zone can be adjusted by a near zone regulator.
The accessories can be fitted at any time.
The unit can be cleaned after the front plate has been
removed and the cleaning port on the internal duct opened.

Clean with water and a mild detergent solution.